Description
The SQFlex is a 3″ solar pump designed for continuous operation with the motor developed specifically for the SQFlex system and is designed according to the permanent-magnet principle with built-in electronic unit.
CONSTRUCTION FEATURES
- MSF 3 motor with maximum power input (P1) of 1400W and speed range of 500 – 3600 min-1, depending on power input and load.
- Maximum power input (P1) of 1400W.
- Maximum current of 8.4A.
SUPPLY VOLTAGE
- Either DC or AC
- 30-300 VDC,PE
- 1×90-240V-10%/+6%/50/60Hz,PE.
CU 200 CONTROL UNIT: The CU 200 is a combined status and control unit for the SQFlex pump system. It enables connection of a level switch placed in a water reservoir or tank
IO 50 SWITCH BOX: The IO 50 is an on/ switch box designed for switching the power supply on and off.
IO 101 SQFlex SWITCH BOX: The IO 101 is an on/ switch used in solar-powered SQFlex systems with a back-up generator.
IO 102 SQFlex BREAKER BOX: The IO 102 is an on/ breaker box used in wind-powered systems making it possible to slow down or stop the wind turbine.
CHARGE CONTROLLER: The charge controller is used when a battery backup system is installed with an SQFlex pumping system.
SOLAR MODULES: The number of solar modules depends on:
- Quantity of water required
- Head required
- Installation location
GENERATOR
In case the power supply from its primary source of energy is temporarily insufficient or unavailable, the SQFlex system can be powered by a generator.
BATTERIES
The SQFlex system can be powered by batteries with a voltage supply of 30-300 VDC
